0P11 DATA CHECK
Cause: Unit check (data check), or
Tape inoperative with mode setting.
This is probably a hardware error.
Programmer Action: none.
Operator Action: See Figure 4 at the beginning of this section. Then issue the LISTIO
command and check that the mode set agrees with the mode used to create the tape. If
correction is necessary, rerun the job.
If the problem recurs, issue the ROD command, execute EREP (see DOS/VS SADF), and have
· log sheet
· listings and job streams of the programs that created and read the tape
available for problem determination.
Used with Courtesy and Permission of International Business Machines, Inc.