Definition of 4112A

 

4112A VOL SERIAL NO. ERROR TLBL=xxxxxx filename SYSxxx=cuu
Cause: The volume serial number on the tape does not agree with the serial number in the
tape label statement.
System Action: If SYSLOG is assigned to a keyboard, the system waits for an operator
response; otherwise, the job is canceled. The volume serial number follows this message.
Programmer Action: Check the TLBL statement or LSERV output for errors and check the
mounting instruction given to the operator. Make the necessary corrections and resubmit the
job.
If the problem recurs, retain the following for problem determination:
· LSERV output
· log sheet
· a system dump at the time of the failure
Operator Action:
1. Check that the correct tape is mounted and that SYSxxx is assigned to the correct drive.
2. Type CANCEL or press END/ENTER to cancel the job, or
Mount a new tape and reply NEWTAP to continue processing, or
Type IGNORE to continue processing with the mounted reel. (File serial number on TLBL
is overridden by volume serial number.) Or
Type BYPASS to continue processing a multi-reel input file. File serial number on TLBL is
not overridden by volume serial number.
3. If standard (permanent) labels were used, execute LSERV and return the output to your
programmer.





Used with Courtesy and Permission of International Business Machines, Inc.